COMPONENTS
1. Internal Door Opening Handle
2. Inner Door Pull Handle
3. Snap ring and spacer
4. Window handle
5. Front door trim panel
Disassembly
1 . Remove the fixing screw of the door opening handle . Remove the front door inner handle.
2 . Disassemble the inside handle by removing the two screws.
3 . Using a cloth, remove the lever snap ring and extract the window regulator handle , collecting the relative spacer.
4. Using a suitable tool, remove the trim clips and pull out the door trim panel.
Installation
1 . Place the trim panel on the door then fit the retaining clips.
2 . Fit the door opening handle by tightening the relative screw.
3 . Fit the inside handle by tightening the two screws.
4 . Fit the window regulator handle complete with spacer and elastic ring with the window glass completely closed.
